|
|
|
Mordel's Bar & Grill |
|
  |
» |
| View previous topic :: View next topic |
| Author |
Message |
Ruger
Lyran Alliance
Kommandant-General
Joined: 04-Feb-2002 00:00
Posts: 2709
|
 Posted: 26-Mar-2026 06:32 Post subject: Executioner-C (Gladiator) [BASE] |
  |
|
| TRO: Executioner-C (Gladiator) [BASE] | BattleMech Technical Readout
Name/Model: Executioner-C (Gladiator) [BASE]
Designer: Ruger
Source(s): Custom Mordel.Net Units
Technology: Clan
Technology Rating: F
Tonnage: 95
Configuration: Biped OmniMech
Era/Year: Dark Age / 3150
Rules (Current): Standard
Rules (Era): Standard
Rules (Year): Standard
Total Cost: 33,555,031 C-Bills
Battle Value: 1,356
Chassis: Clan Series Assault SXE Special Endo-Composite
Power Plant: Heavy Force 380 XL
Walking Speed: 43.2 kph
Maximum Speed: 64.8 kph [86.4 kph]
Jump Jets: None
Jump Capacity: None
Armor: Arcadia Compound Delta VII Ferro-Fibrous
Armament:
35.5 tons of pod space available
Manufacturer: Alshain Battleworx
Primary Factory: Alshain
Communications: Dash-2 Optima
Targeting & Tracking: Hakkøn-Morris LAP
================================================================================================
Overview:
Towards the end of the Dark Age, the warriors of the Rasalhague Dominion began looking at
revamping their ‘Mech forces, with several new designs being developed. For a time, it
almost appeared that these new designs would eclipse those that had served faithfully for
centuries, including the reliable Executioner. Although many always consider the newest to
be the best, others knew that reliability often trumps new developments.
But that does not mean that the old reliable could not be improved upon.
It was for this reason that the Executioner-C was developed.
Capabilities:
One thing that had for centuries tempered the devotion of MechWarriors to the Executioner
was its relatively thin torso armor in relation to its arms and legs. But thinning the armor
in those locations would have been unthinkable. Fortunately, new technological developments
provided additional alternatives.
Replacing the standard chassis with endo-composite internals freed up enough tonnage that
Clan scientists could maximize the ferro-fibrous armor on the design, greatly increasing the
protection across all front locations as well as the rear center torso. This allows the
design to absorb much more punishment before retiring from the field.
To further improve pod space for weapons and equipment, the fixed jump jets and the heat
sink that could not be fitted within the fusion core were also removed. This provides the
design with 35.5 tons of podspace, despite making no other changes to the design, allowing,
with some minor allocation changes, all previous configurations to be possible loadouts, and
creating opportunities for new sets of weapons and equipment.
Deployment:
The Executioner-C has begun deployment to all frontline forces, and is quickly garnering
support among the warriors. Those who have long piloted Executioners appreciate the design
for its improvements, while its opponents have quickly learned to fear its appearance on the
battlefields of the 32nd century.
================================================================================================
Equipment Mass
------------------------------------------------------------------------------------------------
Internal Structure: Endo-Composite 7.50
Engine: 380 XL 20.50
Walking MP: 4
Running MP: 6 [8]
Jumping MP: 0
Heat Sinks (Double): 15 [30] 5.00
Gyro: Standard 4.00
Cockpit: Standard 3.00
Armor Factor: 293 15.50
Type: Ferro-Fibrous
Internal Armor
Structure Value
Head: 3 9
Center Torso: 30 45
Center Torso (rear): 15
R/L Torso: 20 30
R/L Torso (rear): 10
R/L Arm: 16 32
R/L Leg: 20 40
================================================================================================
Location Fixed Spaces Remaining
------------------------------------------------------------------------------------------------
Head 1 Ferro-Fibrous 0
Center Torso 2 Ferro-Fibrous 0
Right Torso 2 XL Engine 8
1 Ferro-Fibrous
1 Endo-Composite
Left Torso 2 XL Engine 4
4 MASC
1 Ferro-Fibrous
1 Endo-Composite
Right Arm 1 Ferro-Fibrous 8
1 Endo-Composite
Left Arm 1 Ferro-Fibrous 8
1 Endo-Composite
Right Leg None 2
Left Leg None 2
================================================================================================
Fixed Equipment Location Critical Tonnage
------------------------------------------------------------------------------------------------
MASC LT 4 4.00
================================================================================================
Alpha Strike Statistics
------------------------------------------------------------------------------------------------
Point Value (PV): 33
TP: BM, SZ: 4, TMM: 2, MV: 10"
Damage: (S) 0 / (M) 0 / (L) 0, OV: 0
Armor (A): 10, Structure (S): 5
Specials: ENE, OMNI
|
|
|
| Back to top |
 
|
Ruger
Lyran Alliance
Kommandant-General
Joined: 04-Feb-2002 00:00
Posts: 2709
|
| Posted: 26-Mar-2026 07:55 Post subject: Executioner-C (Gladiator) Prime |
|
|
| TRO: Executioner-C (Gladiator) Prime | BattleMech Technical Readout
Name/Model: Executioner-C (Gladiator) Prime
Designer: Ruger
Source(s): Custom Mordel.Net Units
Technology: Clan
Technology Rating: F
Tonnage: 95
Configuration: Biped OmniMech
Era/Year: Dark Age / 3150
Rules (Current): Standard
Rules (Era): Standard
Rules (Year): Standard
Total Cost: 37,585,072 C-Bills
Battle Value: 3,013
Chassis: Clan Series Assault SXE Special Endo-Composite
Power Plant: Heavy Force 380 XL
Walking Speed: 43.2 kph
Maximum Speed: 64.8 kph [86.4 kph]
Jump Jets: Standard
Jump Capacity: 120 meters
Armor: Arcadia Compound Delta VII Ferro-Fibrous with CASE II
Armament:
1 ER PPC
2 ER Large Pulse Lasers
2 AP Gauss Rifles
Manufacturer: Alshain Battleworx
Primary Factory: Alshain
Communications: Dash-2 Optima
Targeting & Tracking: Hakkøn-Morris LAP
================================================================================================
Overview:
Towards the end of the Dark Age, the warriors of the Rasalhague Dominion began looking at
revamping their ‘Mech forces, with several new designs being developed. For a time, it
almost appeared that these new designs would eclipse those that had served faithfully for
centuries, including the reliable Executioner. Although many always consider the newest to
be the best, others knew that reliability often trumps new developments.
But that does not mean that the old reliable could not be improved upon.
It was for this reason that the Executioner-C was developed.
Capabilities:
One thing that had for centuries tempered the devotion of MechWarriors to the Executioner
was its relatively thin torso armor in relation to its arms and legs. But thinning the armor
in those locations would have been unthinkable. Fortunately, new technological developments
provided additional alternatives.
Replacing the standard chassis with endo-composite internals freed up enough tonnage that
Clan scientists could maximize the ferro-fibrous armor on the design, greatly increasing the
protection across all front locations as well as the rear center torso. This allows the
design to absorb much more punishment before retiring from the field.
To further improve pod space for weapons and equipment, the fixed jump jets and the heat
sink that could not be fitted within the fusion core were also removed. This provides the
design with 35.5 tons of podspace, despite making no other changes to the design, allowing,
with some minor allocation changes, all previous configurations to be possible loadouts, and
creating opportunities for new sets of weapons and equipment.
Deployment:
The Executioner-C has begun deployment to all frontline forces, and is quickly garnering
support among the warriors. Those who have long piloted Executioners appreciate the design
for its improvements, while its opponents have quickly learned to fear its appearance on the
battlefields of the 32nd century.
================================================================================================
Equipment Mass
------------------------------------------------------------------------------------------------
Internal Structure: Endo-Composite 7.50
Engine: 380 XL 20.50
Walking MP: 4
Running MP: 6 [8]
Jumping MP: 4
Heat Sinks (Double): 22 [44] 12.00
Gyro: Standard 4.00
Cockpit: Standard 3.00
Armor Factor: 293 15.50
Type: Ferro-Fibrous
Internal Armor
Structure Value
Head: 3 9
Center Torso: 30 45
Center Torso (rear): 15
R/L Torso: 20 30
R/L Torso (rear): 10
R/L Arm: 16 32
R/L Leg: 20 40
================================================================================================
Weapons and Ammo Location Critical Tonnage
------------------------------------------------------------------------------------------------
2 AP Gauss Rifles RT 2 1.00
AP Gauss Rifle (Ammo 40) RT 1 1.00
CASE II RT 1 0.50
2 Jump Jets RT 2 4.00
2 Jump Jets LT 2 4.00
MASC LT 4 4.00
2 ER Large Pulse Lasers RA 6 12.00
ER PPC LA 2 6.00
================================================================================================
Alpha Strike Statistics
------------------------------------------------------------------------------------------------
Point Value (PV): 58
TP: BM, SZ: 4, TMM: 2, MV: 10"/8"j
Damage: (S) 5 / (M) 5 / (L) 4, OV: 0
Armor (A): 10, Structure (S): 5
Specials: CASEII, JMPW1, OMNI
|
|
|
| Back to top |
|
Ruger
Lyran Alliance
Kommandant-General
Joined: 04-Feb-2002 00:00
Posts: 2709
|
| Posted: 26-Mar-2026 08:00 Post subject: Executioner-C (Gladiator) Alt Config A |
|
|
| TRO: Executioner-C (Gladiator) Alt Config A | BattleMech Technical Readout
Name/Model: Executioner-C (Gladiator) Alt Config A
Designer: Ruger
Source(s): Custom Mordel.Net Units
Technology: Clan
Technology Rating: F
Tonnage: 95
Configuration: Biped OmniMech
Era/Year: Dark Age / 3150
Rules (Current): Standard
Rules (Era): Standard
Rules (Year): Standard
Total Cost: 47,031,238 C-Bills
Battle Value: 3,450
Chassis: Clan Series Assault SXE Special Endo-Composite
Power Plant: Heavy Force 380 XL
Walking Speed: 43.2 kph
Maximum Speed: 64.8 kph [108 kph]
Jump Jets: Standard
Jump Capacity: 120 meters
Armor: Arcadia Compound Delta VII Ferro-Fibrous with CASE II
Armament:
1 Improved Heavy Large Laser
2 ATM 12s
Manufacturer: Alshain Battleworx
Primary Factory: Alshain
Communications: Dash-2 Optima
Targeting & Tracking: Hakkøn-Morris LAP
================================================================================================
Overview:
Towards the end of the Dark Age, the warriors of the Rasalhague Dominion began looking at
revamping their ‘Mech forces, with several new designs being developed. For a time, it
almost appeared that these new designs would eclipse those that had served faithfully for
centuries, including the reliable Executioner. Although many always consider the newest to
be the best, others knew that reliability often trumps new developments.
But that does not mean that the old reliable could not be improved upon.
It was for this reason that the Executioner-C was developed.
Capabilities:
One thing that had for centuries tempered the devotion of MechWarriors to the Executioner
was its relatively thin torso armor in relation to its arms and legs. But thinning the armor
in those locations would have been unthinkable. Fortunately, new technological developments
provided additional alternatives.
Replacing the standard chassis with endo-composite internals freed up enough tonnage that
Clan scientists could maximize the ferro-fibrous armor on the design, greatly increasing the
protection across all front locations as well as the rear center torso. This allows the
design to absorb much more punishment before retiring from the field.
To further improve pod space for weapons and equipment, the fixed jump jets and the heat
sink that could not be fitted within the fusion core were also removed. This provides the
design with 35.5 tons of podspace, despite making no other changes to the design, allowing,
with some minor allocation changes, all previous configurations to be possible loadouts, and
creating opportunities for new sets of weapons and equipment.
Deployment:
The Executioner-C has begun deployment to all frontline forces, and is quickly garnering
support among the warriors. Those who have long piloted Executioners appreciate the design
for its improvements, while its opponents have quickly learned to fear its appearance on the
battlefields of the 32nd century.
================================================================================================
Equipment Mass
------------------------------------------------------------------------------------------------
Internal Structure: Endo-Composite 7.50
Engine: 380 XL 20.50
Walking MP: 4
Running MP: 6 [10]
Jumping MP: 4
Heat Sinks (Double): 15 [30] 5.00
Gyro: Standard 4.00
Cockpit: Standard 3.00
Armor Factor: 293 15.50
Type: Ferro-Fibrous
Internal Armor
Structure Value
Head: 3 9
Center Torso: 30 45
Center Torso (rear): 15
R/L Torso: 20 30
R/L Torso (rear): 10
R/L Arm: 16 32
R/L Leg: 20 40
================================================================================================
Weapons and Ammo Location Critical Tonnage
------------------------------------------------------------------------------------------------
ATM 12 (Ammo 5) RT 1 1.00
ATM 12 (Ammo 5) [ER] RT 1 1.00
ATM 12 (Ammo 5) [HE] RT 1 1.00
CASE II RT 1 0.50
Improved Heavy Large Laser RT 3 4.00
Supercharger RT 1 2.50
ATM 12 (Ammo 5) LT 1 1.00
ATM 12 (Ammo 5) [ER] LT 1 1.00
ATM 12 (Ammo 5) [HE] LT 1 1.00
CASE II LT 1 0.50
MASC LT 4 4.00
ATM 12 RA 5 7.00
ATM 12 LA 5 7.00
2 Jump Jets RL 2 4.00
2 Jump Jets LL 2 4.00
================================================================================================
Alpha Strike Statistics
------------------------------------------------------------------------------------------------
Point Value (PV): 59
TP: BM, SZ: 4, TMM: 2, MV: 12"/8"j
Damage: (S) 7 / (M) 5 / (L) 2, OV: 1
Armor (A): 10, Structure (S): 5
Specials: CASEII, JMPW1, OMNI
|
|
|
| Back to top |
|
Ruger
Lyran Alliance
Kommandant-General
Joined: 04-Feb-2002 00:00
Posts: 2709
|
| Posted: 26-Mar-2026 08:10 Post subject: Executioner-C (Gladiator) Alt Config B |
|
|
| TRO: Executioner-C (Gladiator) Alt Config B | BattleMech Technical Readout
Name/Model: Executioner-C (Gladiator) Alt Config B
Designer: Ruger
Source(s): Custom Mordel.Net Units
Technology: Clan
Technology Rating: F
Tonnage: 95
Configuration: Biped OmniMech
Era/Year: Dark Age / 3150
Rules (Current): Standard
Rules (Era): Standard
Rules (Year): Standard
Total Cost: 49,128,706 C-Bills
Battle Value: 3,605
Chassis: Clan Series Assault SXE Special Endo-Composite
Power Plant: Heavy Force 380 XL
Walking Speed: 43.2 kph
Maximum Speed: 64.8 kph [108 kph]
Jump Jets: None
Jump Capacity: None
Armor: Arcadia Compound Delta VII Ferro-Fibrous with CASE II
Armament:
2 ER Large Lasers
2 LRM 15 w/ Artemis V FCS
2 Streak SRM 4s
2 ER Small Lasers
Manufacturer: Alshain Battleworx
Primary Factory: Alshain
Communications: Dash-2 Optima with Angel ECM Suite
Targeting & Tracking: Hakkøn-Morris LAP
================================================================================================
Overview:
Towards the end of the Dark Age, the warriors of the Rasalhague Dominion began looking at
revamping their ‘Mech forces, with several new designs being developed. For a time, it
almost appeared that these new designs would eclipse those that had served faithfully for
centuries, including the reliable Executioner. Although many always consider the newest to
be the best, others knew that reliability often trumps new developments.
But that does not mean that the old reliable could not be improved upon.
It was for this reason that the Executioner-C was developed.
Capabilities:
One thing that had for centuries tempered the devotion of MechWarriors to the Executioner
was its relatively thin torso armor in relation to its arms and legs. But thinning the armor
in those locations would have been unthinkable. Fortunately, new technological developments
provided additional alternatives.
Replacing the standard chassis with endo-composite internals freed up enough tonnage that
Clan scientists could maximize the ferro-fibrous armor on the design, greatly increasing the
protection across all front locations as well as the rear center torso. This allows the
design to absorb much more punishment before retiring from the field.
To further improve pod space for weapons and equipment, the fixed jump jets and the heat
sink that could not be fitted within the fusion core were also removed. This provides the
design with 35.5 tons of podspace, despite making no other changes to the design, allowing,
with some minor allocation changes, all previous configurations to be possible loadouts, and
creating opportunities for new sets of weapons and equipment.
Deployment:
The Executioner-C has begun deployment to all frontline forces, and is quickly garnering
support among the warriors. Those who have long piloted Executioners appreciate the design
for its improvements, while its opponents have quickly learned to fear its appearance on the
battlefields of the 32nd century.
================================================================================================
Equipment Mass
------------------------------------------------------------------------------------------------
Internal Structure: Endo-Composite 7.50
Engine: 380 XL 20.50
Walking MP: 4
Running MP: 6 [10]
Jumping MP: 0
Heat Sinks (Double): 17 [34] 7.00
Gyro: Standard 4.00
Cockpit: Standard 3.00
Armor Factor: 293 15.50
Type: Ferro-Fibrous
Internal Armor
Structure Value
Head: 3 9
Center Torso: 30 45
Center Torso (rear): 15
R/L Torso: 20 30
R/L Torso (rear): 10
R/L Arm: 16 32
R/L Leg: 20 40
================================================================================================
Weapons and Ammo Location Critical Tonnage
------------------------------------------------------------------------------------------------
Angel ECM Suite RT 2 2.00
CASE II RT 1 0.50
LRM 15 (Ammo 16) [Artemis V] RT 2 2.00
Streak SRM 4 RT 1 2.00
Streak SRM 4 (Ammo 25) RT 1 1.00
Supercharger RT 1 2.50
CASE II LT 1 0.50
LRM 15 (Ammo 16) [Artemis V] LT 2 2.00
MASC LT 4 4.00
Streak SRM 4 LT 1 2.00
ER Large Laser RA 1 4.00
ER Small Laser RA 1 0.50
LRM 15 w/ Artemis V FCS RA 3 5.00
ER Large Laser LA 1 4.00
ER Small Laser LA 1 0.50
LRM 15 w/ Artemis V FCS LA 3 5.00
================================================================================================
Alpha Strike Statistics
------------------------------------------------------------------------------------------------
Point Value (PV): 69
TP: BM, SZ: 4, TMM: 2, MV: 12"
Damage: (S) 6 / (M) 6 / (L) 5, OV: 2
Armor (A): 10, Structure (S): 5
Specials: AECM, CASEII, IF2, OMNI
|
|
|
| Back to top |
|
Ruger
Lyran Alliance
Kommandant-General
Joined: 04-Feb-2002 00:00
Posts: 2709
|
| Posted: 26-Mar-2026 08:17 Post subject: Executioner-C (Gladiator) Alt Config C |
|
|
| TRO: Executioner-C (Gladiator) Alt Config C | BattleMech Technical Readout
Name/Model: Executioner-C (Gladiator) Alt Config C
Designer: Ruger
Source(s): Custom Mordel.Net Units
Technology: Clan
Technology Rating: F
Tonnage: 95
Configuration: Biped OmniMech
Era/Year: Dark Age / 3150
Rules (Current): Standard
Rules (Era): Standard
Rules (Year): Standard
Total Cost: 39,080,844 C-Bills
Battle Value: 3,576
Chassis: Clan Series Assault SXE Special Endo-Composite
Power Plant: Heavy Force 380 XL
Walking Speed: 43.2 kph
Maximum Speed: 64.8 kph [86.4 kph]
Jump Jets: None
Jump Capacity: None
Armor: Arcadia Compound Delta VII Ferro-Fibrous with CASE II
Armament:
2 ER PPCs
4 Streak SRM 6s
6 Improved Heavy Medium Lasers
Manufacturer: Alshain Battleworx
Primary Factory: Alshain
Communications: Dash-2 Optima
Targeting & Tracking: Hakkøn-Morris LAP
================================================================================================
Overview:
Towards the end of the Dark Age, the warriors of the Rasalhague Dominion began looking at
revamping their ‘Mech forces, with several new designs being developed. For a time, it
almost appeared that these new designs would eclipse those that had served faithfully for
centuries, including the reliable Executioner. Although many always consider the newest to
be the best, others knew that reliability often trumps new developments.
But that does not mean that the old reliable could not be improved upon.
It was for this reason that the Executioner-C was developed.
Capabilities:
One thing that had for centuries tempered the devotion of MechWarriors to the Executioner
was its relatively thin torso armor in relation to its arms and legs. But thinning the armor
in those locations would have been unthinkable. Fortunately, new technological developments
provided additional alternatives.
Replacing the standard chassis with endo-composite internals freed up enough tonnage that
Clan scientists could maximize the ferro-fibrous armor on the design, greatly increasing the
protection across all front locations as well as the rear center torso. This allows the
design to absorb much more punishment before retiring from the field.
To further improve pod space for weapons and equipment, the fixed jump jets and the heat
sink that could not be fitted within the fusion core were also removed. This provides the
design with 35.5 tons of podspace, despite making no other changes to the design, allowing,
with some minor allocation changes, all previous configurations to be possible loadouts, and
creating opportunities for new sets of weapons and equipment.
Deployment:
The Executioner-C has begun deployment to all frontline forces, and is quickly garnering
support among the warriors. Those who have long piloted Executioners appreciate the design
for its improvements, while its opponents have quickly learned to fear its appearance on the
battlefields of the 32nd century.
================================================================================================
Equipment Mass
------------------------------------------------------------------------------------------------
Internal Structure: Endo-Composite 7.50
Engine: 380 XL 20.50
Walking MP: 4
Running MP: 6 [8]
Jumping MP: 0
Heat Sinks (Double): 17 [34] 7.00
Gyro: Standard 4.00
Cockpit: Standard 3.00
Armor Factor: 293 15.50
Type: Ferro-Fibrous
Internal Armor
Structure Value
Head: 3 9
Center Torso: 30 45
Center Torso (rear): 15
R/L Torso: 20 30
R/L Torso (rear): 10
R/L Arm: 16 32
R/L Leg: 20 40
================================================================================================
Weapons and Ammo Location Critical Tonnage
------------------------------------------------------------------------------------------------
CASE II RT 1 0.50
2 Streak SRM 6s RT 4 6.00
Streak SRM 6 (Ammo 45) RT 3 3.00
MASC LT 4 4.00
2 Streak SRM 6s LT 4 6.00
ER PPC RA 2 6.00
3 Improved Heavy Medium Lasers RA 6 3.00
ER PPC LA 2 6.00
3 Improved Heavy Medium Lasers LA 6 3.00
================================================================================================
Alpha Strike Statistics
------------------------------------------------------------------------------------------------
Point Value (PV): 63
TP: BM, SZ: 4, TMM: 2, MV: 10"
Damage: (S) 6 / (M) 6 / (L) 3, OV: 4
Armor (A): 10, Structure (S): 5
Specials: CASEII, OMNI
|
|
|
| Back to top |
|
Ruger
Lyran Alliance
Kommandant-General
Joined: 04-Feb-2002 00:00
Posts: 2709
|
| Posted: 26-Mar-2026 08:22 Post subject: Executioner-C (Gladiator) Alt Config D |
|
|
| TRO: Executioner-C (Gladiator) Alt Config D | BattleMech Technical Readout
Name/Model: Executioner-C (Gladiator) Alt Config D
Designer: Ruger
Source(s): Custom Mordel.Net Units
Technology: Clan
Technology Rating: F
Tonnage: 95
Configuration: Biped OmniMech
Era/Year: Dark Age / 3150
Rules (Current): Standard
Rules (Era): Standard
Rules (Year): Standard
Total Cost: 37,085,384 C-Bills
Battle Value: 3,237
Chassis: Clan Series Assault SXE Special Endo-Composite
Power Plant: Heavy Force 380 XL
Walking Speed: 43.2 kph
Maximum Speed: 64.8 kph [86.4 kph]
Jump Jets: Standard
Jump Capacity: 120 meters
Armor: Arcadia Compound Delta VII Ferro-Fibrous
Armament:
1 Hyper-Assault Gauss 30
2 ER Large Lasers
2 Small Pulse Lasers
Manufacturer: Alshain Battleworx
Primary Factory: Alshain
Communications: Dash-2 Optima
Targeting & Tracking: Hakkøn-Morris LAP with Light Active Probe
================================================================================================
Overview:
Towards the end of the Dark Age, the warriors of the Rasalhague Dominion began looking at
revamping their ‘Mech forces, with several new designs being developed. For a time, it
almost appeared that these new designs would eclipse those that had served faithfully for
centuries, including the reliable Executioner. Although many always consider the newest to
be the best, others knew that reliability often trumps new developments.
But that does not mean that the old reliable could not be improved upon.
It was for this reason that the Executioner-C was developed.
Capabilities:
One thing that had for centuries tempered the devotion of MechWarriors to the Executioner
was its relatively thin torso armor in relation to its arms and legs. But thinning the armor
in those locations would have been unthinkable. Fortunately, new technological developments
provided additional alternatives.
Replacing the standard chassis with endo-composite internals freed up enough tonnage that
Clan scientists could maximize the ferro-fibrous armor on the design, greatly increasing the
protection across all front locations as well as the rear center torso. This allows the
design to absorb much more punishment before retiring from the field.
To further improve pod space for weapons and equipment, the fixed jump jets and the heat
sink that could not be fitted within the fusion core were also removed. This provides the
design with 35.5 tons of podspace, despite making no other changes to the design, allowing,
with some minor allocation changes, all previous configurations to be possible loadouts, and
creating opportunities for new sets of weapons and equipment.
Deployment:
The Executioner-C has begun deployment to all frontline forces, and is quickly garnering
support among the warriors. Those who have long piloted Executioners appreciate the design
for its improvements, while its opponents have quickly learned to fear its appearance on the
battlefields of the 32nd century.
================================================================================================
Equipment Mass
------------------------------------------------------------------------------------------------
Internal Structure: Endo-Composite 7.50
Engine: 380 XL 20.50
Walking MP: 4
Running MP: 6 [8]
Jumping MP: 4
Heat Sinks (Double): 15 [30] 5.00
Gyro: Standard 4.00
Cockpit: Standard 3.00
Armor Factor: 293 15.50
Type: Ferro-Fibrous
Internal Armor
Structure Value
Head: 3 9
Center Torso: 30 45
Center Torso (rear): 15
R/L Torso: 20 30
R/L Torso (rear): 10
R/L Arm: 16 32
R/L Leg: 20 40
================================================================================================
Weapons and Ammo Location Critical Tonnage
------------------------------------------------------------------------------------------------
Light Active Probe RT 1 0.50
2 Small Pulse Lasers RT 2 2.00
Hyper-Assault Gauss 30 (Ammo 16) LT 4 4.00
MASC LT 4 4.00
2 ER Large Lasers RA 2 8.00
Hyper-Assault Gauss 30 LA 8 13.00
2 Jump Jets RL 2 4.00
2 Jump Jets LL 2 4.00
================================================================================================
Alpha Strike Statistics
------------------------------------------------------------------------------------------------
Point Value (PV): 59
TP: BM, SZ: 4, TMM: 2, MV: 10"/8"j
Damage: (S) 5 / (M) 4 / (L) 4, OV: 1
Armor (A): 10, Structure (S): 5
Specials: CASE, FLK2/2/2, JMPW1, LPRB, OMNI, RCN
|
|
|
| Back to top |
|
Ruger
Lyran Alliance
Kommandant-General
Joined: 04-Feb-2002 00:00
Posts: 2709
|
| Posted: 26-Mar-2026 08:38 Post subject: Executioner-C (Gladiator) Alt Config H |
|
|
| TRO: Executioner-C (Gladiator) Alt Config H | BattleMech Technical Readout
Name/Model: Executioner-C (Gladiator) Alt Config H
Designer: Ruger
Source(s): Custom Mordel.Net Units
Technology: Clan
Technology Rating: F
Tonnage: 95
Configuration: Biped OmniMech
Era/Year: Dark Age / 3150
Rules (Current): Standard
Rules (Era): Standard
Rules (Year): Standard
Total Cost: 41,244,613 C-Bills
Battle Value: 2,784
Chassis: Clan Series Assault SXE Special Endo-Composite
Power Plant: Heavy Force 380 XL
Walking Speed: 43.2 kph
Maximum Speed: 64.8 kph [86.4 kph]
Jump Jets: Improved
Jump Capacity: 180 meters
Armor: Arcadia Compound Delta VII Ferro-Fibrous
Armament:
2 Improved Heavy Large Lasers
Manufacturer: Alshain Battleworx
Primary Factory: Alshain
Communications: Dash-2 Optima with Watchdog CEWS
Targeting & Tracking: Unknown with Advanced Targeting Computer
================================================================================================
Overview:
Towards the end of the Dark Age, the warriors of the Rasalhague Dominion began looking at
revamping their ‘Mech forces, with several new designs being developed. For a time, it
almost appeared that these new designs would eclipse those that had served faithfully for
centuries, including the reliable Executioner. Although many always consider the newest to
be the best, others knew that reliability often trumps new developments.
But that does not mean that the old reliable could not be improved upon.
It was for this reason that the Executioner-C was developed.
Capabilities:
One thing that had for centuries tempered the devotion of MechWarriors to the Executioner
was its relatively thin torso armor in relation to its arms and legs. But thinning the armor
in those locations would have been unthinkable. Fortunately, new technological developments
provided additional alternatives.
Replacing the standard chassis with endo-composite internals freed up enough tonnage that
Clan scientists could maximize the ferro-fibrous armor on the design, greatly increasing the
protection across all front locations as well as the rear center torso. This allows the
design to absorb much more punishment before retiring from the field.
To further improve pod space for weapons and equipment, the fixed jump jets and the heat
sink that could not be fitted within the fusion core were also removed. This provides the
design with 35.5 tons of podspace, despite making no other changes to the design, allowing,
with some minor allocation changes, all previous configurations to be possible loadouts, and
creating opportunities for new sets of weapons and equipment.
Deployment:
The Executioner-C has begun deployment to all frontline forces, and is quickly garnering
support among the warriors. Those who have long piloted Executioners appreciate the design
for its improvements, while its opponents have quickly learned to fear its appearance on the
battlefields of the 32nd century.
================================================================================================
Equipment Mass
------------------------------------------------------------------------------------------------
Internal Structure: Endo-Composite 7.50
Engine: 380 XL 20.50
Walking MP: 4
Running MP: 6 [8]
Jumping MP: 6
Heat Sinks (Double): 15 [30] 5.00
Gyro: Standard 4.00
Cockpit: Standard 3.00
Armor Factor: 293 15.50
Type: Ferro-Fibrous
Internal Armor
Structure Value
Head: 3 9
Center Torso: 30 45
Center Torso (rear): 15
R/L Torso: 20 30
R/L Torso (rear): 10
R/L Arm: 16 32
R/L Leg: 20 40
================================================================================================
Weapons and Ammo Location Critical Tonnage
------------------------------------------------------------------------------------------------
2 Improved Jump Jets RT 4 8.00
Targeting Computer RT 2 2.00
Watchdog CEWS RT 2 1.50
2 Improved Jump Jets LT 4 8.00
MASC LT 4 4.00
Improved Heavy Large Laser RA 3 4.00
Improved Heavy Large Laser LA 3 4.00
Improved Jump Jet RL 2 4.00
Improved Jump Jet LL 2 4.00
================================================================================================
Alpha Strike Statistics
------------------------------------------------------------------------------------------------
Point Value (PV): 55
TP: BM, SZ: 4, TMM: 2, MV: 10"/12"j
Damage: (S) 4 / (M) 4 / (L) 0, OV: 0
Armor (A): 10, Structure (S): 5
Specials: CASE, ECM, LPRB, OMNI, RCN, WAT
|
|
|
| Back to top |
|
Ruger
Lyran Alliance
Kommandant-General
Joined: 04-Feb-2002 00:00
Posts: 2709
|
| Posted: 26-Mar-2026 11:06 Post subject: Executioner-C (Gladiator) Alt Config F |
|
|
| TRO: Executioner-C (Gladiator) Alt Config F | BattleMech Technical Readout
Name/Model: Executioner-C (Gladiator) Alt Config F
Designer: Ruger
Source(s): Custom Mordel.Net Units
Technology: Clan (Mixed)
Technology Rating: F
Tonnage: 95
Configuration: Biped OmniMech
Era/Year: Dark Age / 3150
Rules (Current): Standard
Rules (Era): Standard
Rules (Year): Standard
Total Cost: 37,281,238 C-Bills
Battle Value: 2,608
Chassis: Clan Series Assault SXE Special Endo-Composite
Power Plant: Heavy Force 380 XL
Walking Speed: 43.2 kph
Maximum Speed: 64.8 kph [86.4 kph]
Jump Jets: Standard
Jump Capacity: 120 meters
Armor: Arcadia Compound Delta VII Ferro-Fibrous with CASE II
Armament:
2 Plasma Rifles (IS)
2 SRM 4s
6 AP Gauss Rifles
Manufacturer: Alshain Battleworx
Primary Factory: Alshain
Communications: Dash-2 Optima
Targeting & Tracking: Hakkøn-Morris LAP with Light Active Probe
================================================================================================
Overview:
Towards the end of the Dark Age, the warriors of the Rasalhague Dominion began looking at
revamping their ‘Mech forces, with several new designs being developed. For a time, it
almost appeared that these new designs would eclipse those that had served faithfully for
centuries, including the reliable Executioner. Although many always consider the newest to
be the best, others knew that reliability often trumps new developments.
But that does not mean that the old reliable could not be improved upon.
It was for this reason that the Executioner-C was developed.
Capabilities:
One thing that had for centuries tempered the devotion of MechWarriors to the Executioner
was its relatively thin torso armor in relation to its arms and legs. But thinning the armor
in those locations would have been unthinkable. Fortunately, new technological developments
provided additional alternatives.
Replacing the standard chassis with endo-composite internals freed up enough tonnage that
Clan scientists could maximize the ferro-fibrous armor on the design, greatly increasing the
protection across all front locations as well as the rear center torso. This allows the
design to absorb much more punishment before retiring from the field.
To further improve pod space for weapons and equipment, the fixed jump jets and the heat
sink that could not be fitted within the fusion core were also removed. This provides the
design with 35.5 tons of podspace, despite making no other changes to the design, allowing,
with some minor allocation changes, all previous configurations to be possible loadouts, and
creating opportunities for new sets of weapons and equipment.
Deployment:
The Executioner-C has begun deployment to all frontline forces, and is quickly garnering
support among the warriors. Those who have long piloted Executioners appreciate the design
for its improvements, while its opponents have quickly learned to fear its appearance on the
battlefields of the 32nd century.
================================================================================================
Equipment Mass
------------------------------------------------------------------------------------------------
Internal Structure: Endo-Composite 7.50
Engine: 380 XL 20.50
Walking MP: 4
Running MP: 6 [8]
Jumping MP: 4
Heat Sinks (Double): 15 [30] 5.00
Gyro: Standard 4.00
Cockpit: Standard 3.00
Armor Factor: 293 15.50
Type: Ferro-Fibrous
Internal Armor
Structure Value
Head: 3 9
Center Torso: 30 45
Center Torso (rear): 15
R/L Torso: 20 30
R/L Torso (rear): 10
R/L Arm: 16 32
R/L Leg: 20 40
================================================================================================
Weapons and Ammo Location Critical Tonnage
------------------------------------------------------------------------------------------------
3 AP Gauss Rifles RT 3 1.50
AP Gauss Rifle (Ammo 40) RT 1 1.00
CASE II RT 1 0.50
Light Active Probe RT 1 0.50
SRM 4 (Ammo 25) RT 1 1.00
SRM 4 (Ammo 25) [Inferno] RT 1 1.00
3 AP Gauss Rifles LT 3 1.50
CASE II LT 1 0.50
MASC LT 4 4.00
AP Gauss Rifle (Ammo 40) RA 1 1.00
Plasma Rifle (IS) RA 2 6.00
Plasma Rifle (Ammo 20) (IS) RA 2 2.00
SRM 4 RA 1 1.00
AP Gauss Rifle (Ammo 40) LA 1 1.00
Plasma Rifle (IS) LA 2 6.00
Plasma Rifle (Ammo 20) (IS) LA 2 2.00
SRM 4 LA 1 1.00
2 Jump Jets RL 2 4.00
2 Jump Jets LL 2 4.00
================================================================================================
Alpha Strike Statistics
------------------------------------------------------------------------------------------------
Point Value (PV): 58
TP: BM, SZ: 4, TMM: 2, MV: 10"/8"j
Damage: (S) 5 / (M) 5 / (L) 0, OV: 0
Armor (A): 10, Structure (S): 5
Specials: CASEII, HT1/1/-, JMPW1, LPRB, OMNI, RCN, SRM1/1
|
|
|
| Back to top |
|
Ruger
Lyran Alliance
Kommandant-General
Joined: 04-Feb-2002 00:00
Posts: 2709
|
| Posted: 26-Mar-2026 11:06 Post subject: Executioner-C (Gladiator) Alt Config F |
|
|
| TRO: Executioner-C (Gladiator) Alt Config F | BattleMech Technical Readout
Name/Model: Executioner-C (Gladiator) Alt Config F
Designer: Ruger
Source(s): Custom Mordel.Net Units
Technology: Clan (Mixed)
Technology Rating: F
Tonnage: 95
Configuration: Biped OmniMech
Era/Year: Dark Age / 3150
Rules (Current): Standard
Rules (Era): Standard
Rules (Year): Standard
Total Cost: 37,281,238 C-Bills
Battle Value: 2,608
Chassis: Clan Series Assault SXE Special Endo-Composite
Power Plant: Heavy Force 380 XL
Walking Speed: 43.2 kph
Maximum Speed: 64.8 kph [86.4 kph]
Jump Jets: Standard
Jump Capacity: 120 meters
Armor: Arcadia Compound Delta VII Ferro-Fibrous with CASE II
Armament:
2 Plasma Rifles (IS)
2 SRM 4s
6 AP Gauss Rifles
Manufacturer: Alshain Battleworx
Primary Factory: Alshain
Communications: Dash-2 Optima
Targeting & Tracking: Hakkøn-Morris LAP with Light Active Probe
================================================================================================
Overview:
Towards the end of the Dark Age, the warriors of the Rasalhague Dominion began looking at
revamping their ‘Mech forces, with several new designs being developed. For a time, it
almost appeared that these new designs would eclipse those that had served faithfully for
centuries, including the reliable Executioner. Although many always consider the newest to
be the best, others knew that reliability often trumps new developments.
But that does not mean that the old reliable could not be improved upon.
It was for this reason that the Executioner-C was developed.
Capabilities:
One thing that had for centuries tempered the devotion of MechWarriors to the Executioner
was its relatively thin torso armor in relation to its arms and legs. But thinning the armor
in those locations would have been unthinkable. Fortunately, new technological developments
provided additional alternatives.
Replacing the standard chassis with endo-composite internals freed up enough tonnage that
Clan scientists could maximize the ferro-fibrous armor on the design, greatly increasing the
protection across all front locations as well as the rear center torso. This allows the
design to absorb much more punishment before retiring from the field.
To further improve pod space for weapons and equipment, the fixed jump jets and the heat
sink that could not be fitted within the fusion core were also removed. This provides the
design with 35.5 tons of podspace, despite making no other changes to the design, allowing,
with some minor allocation changes, all previous configurations to be possible loadouts, and
creating opportunities for new sets of weapons and equipment.
Deployment:
The Executioner-C has begun deployment to all frontline forces, and is quickly garnering
support among the warriors. Those who have long piloted Executioners appreciate the design
for its improvements, while its opponents have quickly learned to fear its appearance on the
battlefields of the 32nd century.
================================================================================================
Equipment Mass
------------------------------------------------------------------------------------------------
Internal Structure: Endo-Composite 7.50
Engine: 380 XL 20.50
Walking MP: 4
Running MP: 6 [8]
Jumping MP: 4
Heat Sinks (Double): 15 [30] 5.00
Gyro: Standard 4.00
Cockpit: Standard 3.00
Armor Factor: 293 15.50
Type: Ferro-Fibrous
Internal Armor
Structure Value
Head: 3 9
Center Torso: 30 45
Center Torso (rear): 15
R/L Torso: 20 30
R/L Torso (rear): 10
R/L Arm: 16 32
R/L Leg: 20 40
================================================================================================
Weapons and Ammo Location Critical Tonnage
------------------------------------------------------------------------------------------------
3 AP Gauss Rifles RT 3 1.50
AP Gauss Rifle (Ammo 40) RT 1 1.00
CASE II RT 1 0.50
Light Active Probe RT 1 0.50
SRM 4 (Ammo 25) RT 1 1.00
SRM 4 (Ammo 25) [Inferno] RT 1 1.00
3 AP Gauss Rifles LT 3 1.50
CASE II LT 1 0.50
MASC LT 4 4.00
AP Gauss Rifle (Ammo 40) RA 1 1.00
Plasma Rifle (IS) RA 2 6.00
Plasma Rifle (Ammo 20) (IS) RA 2 2.00
SRM 4 RA 1 1.00
AP Gauss Rifle (Ammo 40) LA 1 1.00
Plasma Rifle (IS) LA 2 6.00
Plasma Rifle (Ammo 20) (IS) LA 2 2.00
SRM 4 LA 1 1.00
2 Jump Jets RL 2 4.00
2 Jump Jets LL 2 4.00
================================================================================================
Alpha Strike Statistics
------------------------------------------------------------------------------------------------
Point Value (PV): 58
TP: BM, SZ: 4, TMM: 2, MV: 10"/8"j
Damage: (S) 5 / (M) 5 / (L) 0, OV: 0
Armor (A): 10, Structure (S): 5
Specials: CASEII, HT1/1/-, JMPW1, LPRB, OMNI, RCN, SRM1/1
|
|
|
| Back to top |
|
Ruger
Lyran Alliance
Kommandant-General
Joined: 04-Feb-2002 00:00
Posts: 2709
|
| Posted: 26-Mar-2026 11:17 Post subject: Executioner-C (Gladiator) Alt Config E |
|
|
| TRO: Executioner-C (Gladiator) Alt Config E | BattleMech Technical Readout
Name/Model: Executioner-C (Gladiator) Alt Config E
Designer: Ruger
Source(s): Custom Mordel.Net Units
Technology: Clan
Technology Rating: F
Tonnage: 95
Configuration: Biped OmniMech
Era/Year: Dark Age / 3150
Rules (Current): Standard
Rules (Era): Standard
Rules (Year): Standard
Total Cost: 36,851,750 C-Bills
Battle Value: 3,104
Chassis: Clan Series Assault SXE Special Endo-Composite
Power Plant: Heavy Force 380 XL
Walking Speed: 43.2 kph
Maximum Speed: 64.8 kph [86.4 kph]
Jump Jets: None
Jump Capacity: None
Armor: Arcadia Compound Delta VII Ferro-Fibrous
Armament:
2 Hyper-Assault Gauss 20s
2 ER Large Lasers
4 ER Small Lasers
1 Flamer
Manufacturer: Alshain Battleworx
Primary Factory: Alshain
Communications: Dash-2 Optima
Targeting & Tracking: Hakkøn-Morris LAP
================================================================================================
Overview:
Towards the end of the Dark Age, the warriors of the Rasalhague Dominion began looking at
revamping their ‘Mech forces, with several new designs being developed. For a time, it
almost appeared that these new designs would eclipse those that had served faithfully for
centuries, including the reliable Executioner. Although many always consider the newest to
be the best, others knew that reliability often trumps new developments.
But that does not mean that the old reliable could not be improved upon.
It was for this reason that the Executioner-C was developed.
Capabilities:
One thing that had for centuries tempered the devotion of MechWarriors to the Executioner
was its relatively thin torso armor in relation to its arms and legs. But thinning the armor
in those locations would have been unthinkable. Fortunately, new technological developments
provided additional alternatives.
Replacing the standard chassis with endo-composite internals freed up enough tonnage that
Clan scientists could maximize the ferro-fibrous armor on the design, greatly increasing the
protection across all front locations as well as the rear center torso. This allows the
design to absorb much more punishment before retiring from the field.
To further improve pod space for weapons and equipment, the fixed jump jets and the heat
sink that could not be fitted within the fusion core were also removed. This provides the
design with 35.5 tons of podspace, despite making no other changes to the design, allowing,
with some minor allocation changes, all previous configurations to be possible loadouts, and
creating opportunities for new sets of weapons and equipment.
Deployment:
The Executioner-C has begun deployment to all frontline forces, and is quickly garnering
support among the warriors. Those who have long piloted Executioners appreciate the design
for its improvements, while its opponents have quickly learned to fear its appearance on the
battlefields of the 32nd century.
================================================================================================
Equipment Mass
------------------------------------------------------------------------------------------------
Internal Structure: Endo-Composite 7.50
Engine: 380 XL 20.50
Walking MP: 4
Running MP: 6 [8]
Jumping MP: 0
Heat Sinks (Double): 15 [30] 5.00
Gyro: Standard 4.00
Cockpit: Standard 3.00
Armor Factor: 293 15.50
Type: Ferro-Fibrous
Internal Armor
Structure Value
Head: 3 9
Center Torso: 30 45
Center Torso (rear): 15
R/L Torso: 20 30
R/L Torso (rear): 10
R/L Arm: 16 32
R/L Leg: 20 40
================================================================================================
Weapons and Ammo Location Critical Tonnage
------------------------------------------------------------------------------------------------
2 ER Small Lasers RT 2 1.00
Flamer RT 1 0.50
Hyper-Assault Gauss 20 (Ammo 30) RT 5 5.00
2 ER Small Lasers LT 2 1.00
MASC LT 4 4.00
ER Large Laser RA 1 4.00
Hyper-Assault Gauss 20 RA 6 10.00
ER Large Laser LA 1 4.00
Hyper-Assault Gauss 20 LA 6 10.00
================================================================================================
Alpha Strike Statistics
------------------------------------------------------------------------------------------------
Point Value (PV): 61
TP: BM, SZ: 4, TMM: 2, MV: 10"
Damage: (S) 6 / (M) 5 / (L) 5, OV: 2
Armor (A): 10, Structure (S): 5
Specials: CASE, FLK2/2/2, OMNI
|
|
|
| Back to top |
|
Ruger
Lyran Alliance
Kommandant-General
Joined: 04-Feb-2002 00:00
Posts: 2709
|
| Posted: 26-Mar-2026 11:21 Post subject: Executioner-C (Gladiator) Alt Config G |
|
|
| TRO: Executioner-C (Gladiator) Alt Config G | BattleMech Technical Readout
Name/Model: Executioner-C (Gladiator) Alt Config G
Designer: Ruger
Source(s): Custom Mordel.Net Units
Technology: Clan
Technology Rating: F
Tonnage: 95
Configuration: Biped OmniMech
Era/Year: Dark Age / 3150
Rules (Current): Standard
Rules (Era): Standard
Rules (Year): Standard
Total Cost: 37,394,094 C-Bills
Battle Value: 2,969
Chassis: Clan Series Assault SXE Special Endo-Composite
Power Plant: Heavy Force 380 XL
Walking Speed: 43.2 kph
Maximum Speed: 64.8 kph [86.4 kph]
Jump Jets: None
Jump Capacity: None
Armor: Arcadia Compound Delta VII Ferro-Fibrous with CASE II
Armament:
2 ER PPCs
2 LB 10-X ACs
Manufacturer: Alshain Battleworx
Primary Factory: Alshain
Communications: Dash-2 Optima
Targeting & Tracking: Hakkøn-Morris LAP
================================================================================================
Overview:
Towards the end of the Dark Age, the warriors of the Rasalhague Dominion began looking at
revamping their ‘Mech forces, with several new designs being developed. For a time, it
almost appeared that these new designs would eclipse those that had served faithfully for
centuries, including the reliable Executioner. Although many always consider the newest to
be the best, others knew that reliability often trumps new developments.
But that does not mean that the old reliable could not be improved upon.
It was for this reason that the Executioner-C was developed.
Capabilities:
One thing that had for centuries tempered the devotion of MechWarriors to the Executioner
was its relatively thin torso armor in relation to its arms and legs. But thinning the armor
in those locations would have been unthinkable. Fortunately, new technological developments
provided additional alternatives.
Replacing the standard chassis with endo-composite internals freed up enough tonnage that
Clan scientists could maximize the ferro-fibrous armor on the design, greatly increasing the
protection across all front locations as well as the rear center torso. This allows the
design to absorb much more punishment before retiring from the field.
To further improve pod space for weapons and equipment, the fixed jump jets and the heat
sink that could not be fitted within the fusion core were also removed. This provides the
design with 35.5 tons of podspace, despite making no other changes to the design, allowing,
with some minor allocation changes, all previous configurations to be possible loadouts, and
creating opportunities for new sets of weapons and equipment.
Deployment:
The Executioner-C has begun deployment to all frontline forces, and is quickly garnering
support among the warriors. Those who have long piloted Executioners appreciate the design
for its improvements, while its opponents have quickly learned to fear its appearance on the
battlefields of the 32nd century.
================================================================================================
Equipment Mass
------------------------------------------------------------------------------------------------
Internal Structure: Endo-Composite 7.50
Engine: 380 XL 20.50
Walking MP: 4
Running MP: 6 [8]
Jumping MP: 0
Heat Sinks (Double): 15 [30] 5.00
Gyro: Standard 4.00
Cockpit: Standard 3.00
Armor Factor: 293 15.50
Type: Ferro-Fibrous
Internal Armor
Structure Value
Head: 3 9
Center Torso: 30 45
Center Torso (rear): 15
R/L Torso: 20 30
R/L Torso (rear): 10
R/L Arm: 16 32
R/L Leg: 20 40
================================================================================================
Weapons and Ammo Location Critical Tonnage
------------------------------------------------------------------------------------------------
CASE II RT 1 0.50
LB 10-X AC (Ammo 20) RT 2 2.00
LB 10-X AC (Ammo 10) [Cluster] RT 1 1.00
MASC LT 4 4.00
ER PPC RA 2 6.00
LB 10-X AC RA 5 10.00
ER PPC LA 2 6.00
LB 10-X AC LA 5 10.00
================================================================================================
Alpha Strike Statistics
------------------------------------------------------------------------------------------------
Point Value (PV): 55
TP: BM, SZ: 4, TMM: 2, MV: 10"
Damage: (S) 4 / (M) 4 / (L) 4, OV: 1
Armor (A): 10, Structure (S): 5
Specials: CASEII, FLK1/1/1, OMNI, OVL
|
|
|
| Back to top |
|
Ruger
Lyran Alliance
Kommandant-General
Joined: 04-Feb-2002 00:00
Posts: 2709
|
| Posted: 26-Mar-2026 15:33 Post subject: Executioner-C (Gladiator) Alt Config U |
|
|
| TRO: Executioner-C (Gladiator) Alt Config U | BattleMech Technical Readout
Name/Model: Executioner-C (Gladiator) Alt Config U
Designer: Ruger
Source(s): Custom Mordel.Net Units
Technology: Clan
Technology Rating: F
Tonnage: 95
Configuration: Biped OmniMech
Era/Year: Dark Age / 3150
Rules (Current): Standard
Rules (Era): Standard
Rules (Year): Standard
Total Cost: 38,488,531 C-Bills
Battle Value: 3,076
Chassis: Clan Series Assault SXE Special Endo-Composite
Power Plant: Heavy Force 380 XL
Walking Speed: 43.2 kph
Maximum Speed: 64.8 kph [86.4 kph]
Jump Jets: None
Jump Capacity: None
Armor: Arcadia Compound Delta VII Ferro-Fibrous with CASE II
Armament:
2 LRT 20 w/ Artemis IV FCS
2 ER Medium Lasers
2 SRT 6 w/ Artemis IV FCS
Manufacturer: Alshain Battleworx
Primary Factory: Alshain
Communications: Dash-2 Optima
Targeting & Tracking: Hakkøn-Morris LAP with Light Active Probe
================================================================================================
Overview:
Towards the end of the Dark Age, the warriors of the Rasalhague Dominion began looking at
revamping their ‘Mech forces, with several new designs being developed. For a time, it
almost appeared that these new designs would eclipse those that had served faithfully for
centuries, including the reliable Executioner. Although many always consider the newest to
be the best, others knew that reliability often trumps new developments.
But that does not mean that the old reliable could not be improved upon.
It was for this reason that the Executioner-C was developed.
Capabilities:
One thing that had for centuries tempered the devotion of MechWarriors to the Executioner
was its relatively thin torso armor in relation to its arms and legs. But thinning the armor
in those locations would have been unthinkable. Fortunately, new technological developments
provided additional alternatives.
Replacing the standard chassis with endo-composite internals freed up enough tonnage that
Clan scientists could maximize the ferro-fibrous armor on the design, greatly increasing the
protection across all front locations as well as the rear center torso. This allows the
design to absorb much more punishment before retiring from the field.
To further improve pod space for weapons and equipment, the fixed jump jets and the heat
sink that could not be fitted within the fusion core were also removed. This provides the
design with 35.5 tons of podspace, despite making no other changes to the design, allowing,
with some minor allocation changes, all previous configurations to be possible loadouts, and
creating opportunities for new sets of weapons and equipment.
Deployment:
The Executioner-C has begun deployment to all frontline forces, and is quickly garnering
support among the warriors. Those who have long piloted Executioners appreciate the design
for its improvements, while its opponents have quickly learned to fear its appearance on the
battlefields of the 32nd century.
================================================================================================
Equipment Mass
------------------------------------------------------------------------------------------------
Internal Structure: Endo-Composite 7.50
Engine: 380 XL 20.50
Walking MP: 4
Running MP: 6 [8]
Underwater MP: 4
Heat Sinks (Double): 15 [30] 5.00
Gyro: Standard 4.00
Cockpit: Standard 3.00
Armor Factor: 293 15.50
Type: Ferro-Fibrous
Internal Armor
Structure Value
Head: 3 9
Center Torso: 30 45
Center Torso (rear): 15
R/L Torso: 20 30
R/L Torso (rear): 10
R/L Arm: 16 32
R/L Leg: 20 40
================================================================================================
Weapons and Ammo Location Critical Tonnage
------------------------------------------------------------------------------------------------
CASE II RT 1 0.50
LRT 20 (Ammo 24) [Artemis IV] RT 4 4.00
Light Active Probe RT 1 0.50
SRT 6 (Ammo 15) [Artemis IV] RT 1 1.00
UMU RT 1 2.00
CASE II LT 1 0.50
LRT 20 (Ammo 6) [Artemis IV] LT 1 1.00
MASC LT 4 4.00
SRT 6 (Ammo 15) [Artemis IV] LT 1 1.00
UMU LT 1 2.00
ER Medium Laser RA 1 1.00
LRT 20 w/ Artemis IV FCS RA 5 6.00
SRT 6 w/ Artemis IV FCS RA 2 2.50
ER Medium Laser LA 1 1.00
LRT 20 w/ Artemis IV FCS LA 5 6.00
SRT 6 w/ Artemis IV FCS LA 2 2.50
UMU RL 1 2.00
UMU LL 1 2.00
================================================================================================
Alpha Strike Statistics
------------------------------------------------------------------------------------------------
Point Value (PV): 62
TP: BM, SZ: 4, TMM: 2, MV: 10"/8"s
Damage: (S) 2 / (M) 2 / (L) 0, OV: 0
Armor (A): 10, Structure (S): 5
Specials: CASEII, LPRB, OMNI, RCN, SUBW1, TOR5/5/3, UMU
|
|
|
| Back to top |
|
Ruger
Lyran Alliance
Kommandant-General
Joined: 04-Feb-2002 00:00
Posts: 2709
|
| Posted: 26-Mar-2026 19:33 Post subject: Executioner-C (Gladiator) Alt Config I |
|
|
| TRO: Executioner-C (Gladiator) Alt Config I | BattleMech Technical Readout
Name/Model: Executioner-C (Gladiator) Alt Config I
Designer: Ruger
Source(s): Custom Mordel.Net Units
Technology: Clan
Technology Rating: F
Tonnage: 95
Configuration: Biped OmniMech
Era/Year: Dark Age / 3150
Rules (Current): Standard
Rules (Era): Standard
Rules (Year): Standard
Total Cost: 45,643,813 C-Bills
Battle Value: 3,349
Chassis: Clan Series Assault SXE Special Endo-Composite
Power Plant: Heavy Force 380 XL
Walking Speed: 43.2 kph
Maximum Speed: 64.8 kph [108 kph]
Jump Jets: None
Jump Capacity: None
Armor: Arcadia Compound Delta VII Ferro-Fibrous
Armament:
1 ER PPC
2 Medium Pulse Lasers
6 ER Medium Lasers
Manufacturer: Alshain Battleworx
Primary Factory: Alshain
Communications: Dash-2 Optima with ECM Suite
Targeting & Tracking: Hakkøn-Morris LAP
================================================================================================
Overview:
Towards the end of the Dark Age, the warriors of the Rasalhague Dominion began looking at
revamping their ‘Mech forces, with several new designs being developed. For a time, it
almost appeared that these new designs would eclipse those that had served faithfully for
centuries, including the reliable Executioner. Although many always consider the newest to
be the best, others knew that reliability often trumps new developments.
But that does not mean that the old reliable could not be improved upon.
It was for this reason that the Executioner-C was developed.
Capabilities:
One thing that had for centuries tempered the devotion of MechWarriors to the Executioner
was its relatively thin torso armor in relation to its arms and legs. But thinning the armor
in those locations would have been unthinkable. Fortunately, new technological developments
provided additional alternatives.
Replacing the standard chassis with endo-composite internals freed up enough tonnage that
Clan scientists could maximize the ferro-fibrous armor on the design, greatly increasing the
protection across all front locations as well as the rear center torso. This allows the
design to absorb much more punishment before retiring from the field.
To further improve pod space for weapons and equipment, the fixed jump jets and the heat
sink that could not be fitted within the fusion core were also removed. This provides the
design with 35.5 tons of podspace, despite making no other changes to the design, allowing,
with some minor allocation changes, all previous configurations to be possible loadouts, and
creating opportunities for new sets of weapons and equipment.
Deployment:
The Executioner-C has begun deployment to all frontline forces, and is quickly garnering
support among the warriors. Those who have long piloted Executioners appreciate the design
for its improvements, while its opponents have quickly learned to fear its appearance on the
battlefields of the 32nd century.
================================================================================================
Equipment Mass
------------------------------------------------------------------------------------------------
Internal Structure: Endo-Composite 7.50
Engine: 380 XL 20.50
Walking MP: 4
Running MP: 6 [10]
Jumping MP: 0
Heat Sinks (Double): 17 [34] 7.00
Gyro: Standard 4.00
Cockpit: Standard 3.00
Armor Factor: 293 15.50
Type: Ferro-Fibrous
Internal Armor
Structure Value
Head: 3 9
Center Torso: 30 45
Center Torso (rear): 15
R/L Torso: 20 30
R/L Torso (rear): 10
R/L Arm: 16 32
R/L Leg: 20 40
================================================================================================
Weapons and Ammo Location Critical Tonnage
------------------------------------------------------------------------------------------------
ECM Suite RT 1 1.00
3 ER Medium Lasers RT 3 3.00
ER PPC RT 2 6.00
Medium Pulse Laser RT (R) 1 2.00
Supercharger RT 1 2.50
3 ER Medium Lasers LT 3 3.00
MASC LT 4 4.00
Medium Pulse Laser LT (R) 1 2.00
Claws RA 7 7.00
Claws LA 7 7.00
================================================================================================
Alpha Strike Statistics
------------------------------------------------------------------------------------------------
Point Value (PV): 59
TP: BM, SZ: 4, TMM: 2, MV: 12"
Damage: (S) 5 / (M) 5 / (L) 2, OV: 1
Armor (A): 10, Structure (S): 5
Specials: ECM, ENE, MEL, OMNI, REAR2/2/-
|
|
|
| Back to top |
|
Ruger
Lyran Alliance
Kommandant-General
Joined: 04-Feb-2002 00:00
Posts: 2709
|
| Posted: 26-Mar-2026 19:57 Post subject: Executioner-C (Gladiator) Alt Config J |
|
|
| TRO: Executioner-C (Gladiator) Alt Config J | BattleMech Technical Readout
Name/Model: Executioner-C (Gladiator) Alt Config J
Designer: Ruger
Source(s): Custom Mordel.Net Units
Technology: Clan (Mixed)
Technology Rating: F
Tonnage: 95
Configuration: Biped OmniMech
Era/Year: Dark Age / 3150
Rules (Current): Advanced
Rules (Era): Advanced
Rules (Year): Advanced
Total Cost: 47,669,863 C-Bills
Battle Value: 2,482
Chassis: Clan Series Assault SXE Special Endo-Composite
Power Plant: Heavy Force 380 XL
Walking Speed: 43.2 kph [32.4 kph]
Maximum Speed: 64.8 kph [86.4 kph]
Jump Jets: Standard
Jump Capacity: 120 meters [90 meters]
Armor: Arcadia Compound Delta VII Ferro-Fibrous
Armament:
2 ER Large Pulse Lasers
Manufacturer: Alshain Battleworx
Primary Factory: Alshain
Communications: Dash-2 Optima
Targeting & Tracking: Hakkøn-Morris LAP
================================================================================================
Overview:
Towards the end of the Dark Age, the warriors of the Rasalhague Dominion began looking at
revamping their ‘Mech forces, with several new designs being developed. For a time, it
almost appeared that these new designs would eclipse those that had served faithfully for
centuries, including the reliable Executioner. Although many always consider the newest to
be the best, others knew that reliability often trumps new developments.
But that does not mean that the old reliable could not be improved upon.
It was for this reason that the Executioner-C was developed.
Capabilities:
One thing that had for centuries tempered the devotion of MechWarriors to the Executioner
was its relatively thin torso armor in relation to its arms and legs. But thinning the armor
in those locations would have been unthinkable. Fortunately, new technological developments
provided additional alternatives.
Replacing the standard chassis with endo-composite internals freed up enough tonnage that
Clan scientists could maximize the ferro-fibrous armor on the design, greatly increasing the
protection across all front locations as well as the rear center torso. This allows the
design to absorb much more punishment before retiring from the field.
To further improve pod space for weapons and equipment, the fixed jump jets and the heat
sink that could not be fitted within the fusion core were also removed. This provides the
design with 35.5 tons of podspace, despite making no other changes to the design, allowing,
with some minor allocation changes, all previous configurations to be possible loadouts, and
creating opportunities for new sets of weapons and equipment.
Deployment:
The Executioner-C has begun deployment to all frontline forces, and is quickly garnering
support among the warriors. Those who have long piloted Executioners appreciate the design
for its improvements, while its opponents have quickly learned to fear its appearance on the
battlefields of the 32nd century.
================================================================================================
Equipment Mass
------------------------------------------------------------------------------------------------
Internal Structure: Endo-Composite 7.50
Engine: 380 XL 20.50
Walking MP: 4 [3]
Running MP: 6 [8]
Jumping MP: 4 [3]
Heat Sinks (Double): 17 [34] 7.00
Gyro: Standard 4.00
Cockpit: Standard 3.00
Armor Factor: 293 15.50
Type: Ferro-Fibrous
Internal Armor
Structure Value
Head: 3 9
Center Torso: 30 45
Center Torso (rear): 15
R/L Torso: 20 30
R/L Torso (rear): 10
R/L Arm: 16 32
R/L Leg: 20 40
================================================================================================
Weapons and Ammo Location Critical Tonnage
------------------------------------------------------------------------------------------------
2 ER Large Pulse Lasers RT 6 12.00
2 Jump Jets RT 2 4.00
2 Jump Jets LT 2 4.00
MASC LT 4 4.00
Supercharger LT 1 2.50
Large Vibroblade (IS) RA 4 7.00
Medium Shield (IS) LA 5 4.00
================================================================================================
Alpha Strike Statistics
------------------------------------------------------------------------------------------------
Point Value (PV): 51
TP: BM, SZ: 4, TMM: 2, MV: 10"/6"j
Damage: (S) 3 / (M) 3 / (L) 3, OV: 0
Armor (A): 10, Structure (S): 5
Specials: ENE, JMPW1, MEL, OMNI, SHLD
|
|
|
| Back to top |
|
Ruger
Lyran Alliance
Kommandant-General
Joined: 04-Feb-2002 00:00
Posts: 2709
|
| Posted: 27-Mar-2026 08:41 Post subject: Executioner-C (Gladiator) Alt Config K |
|
|
| TRO: Executioner-C (Gladiator) Alt Config K | BattleMech Technical Readout
Name/Model: Executioner-C (Gladiator) Alt Config K
Designer: Ruger
Source(s): Custom Mordel.Net Units
Technology: Clan
Technology Rating: F
Tonnage: 95
Configuration: Biped OmniMech
Era/Year: Dark Age / 3150
Rules (Current): Standard
Rules (Era): Standard
Rules (Year): Standard
Total Cost: 38,369,094 C-Bills
Battle Value: 3,791
Chassis: Clan Series Assault SXE Special Endo-Composite
Power Plant: Heavy Force 380 XL
Walking Speed: 43.2 kph
Maximum Speed: 64.8 kph [86.4 kph]
Jump Jets: None
Jump Capacity: None
Armor: Arcadia Compound Delta VII Ferro-Fibrous with CASE II
Armament:
2 ER PPCs
2 Improved Heavy Large Lasers
2 Streak SRM 6s
2 SRM 4s
Manufacturer: Alshain Battleworx
Primary Factory: Alshain
Communications: Dash-2 Optima
Targeting & Tracking: Unknown with Advanced Targeting Computer
================================================================================================
Overview:
Towards the end of the Dark Age, the warriors of the Rasalhague Dominion began looking at
revamping their ‘Mech forces, with several new designs being developed. For a time, it
almost appeared that these new designs would eclipse those that had served faithfully for
centuries, including the reliable Executioner. Although many always consider the newest to
be the best, others knew that reliability often trumps new developments.
But that does not mean that the old reliable could not be improved upon.
It was for this reason that the Executioner-C was developed.
Capabilities:
One thing that had for centuries tempered the devotion of MechWarriors to the Executioner
was its relatively thin torso armor in relation to its arms and legs. But thinning the armor
in those locations would have been unthinkable. Fortunately, new technological developments
provided additional alternatives.
Replacing the standard chassis with endo-composite internals freed up enough tonnage that
Clan scientists could maximize the ferro-fibrous armor on the design, greatly increasing the
protection across all front locations as well as the rear center torso. This allows the
design to absorb much more punishment before retiring from the field.
To further improve pod space for weapons and equipment, the fixed jump jets and the heat
sink that could not be fitted within the fusion core were also removed. This provides the
design with 35.5 tons of podspace, despite making no other changes to the design, allowing,
with some minor allocation changes, all previous configurations to be possible loadouts, and
creating opportunities for new sets of weapons and equipment.
Deployment:
The Executioner-C has begun deployment to all frontline forces, and is quickly garnering
support among the warriors. Those who have long piloted Executioners appreciate the design
for its improvements, while its opponents have quickly learned to fear its appearance on the
battlefields of the 32nd century.
================================================================================================
Equipment Mass
------------------------------------------------------------------------------------------------
Internal Structure: Endo-Composite 7.50
Engine: 380 XL 20.50
Walking MP: 4
Running MP: 6 [8]
Jumping MP: 0
Heat Sinks (Double): 15 [30] 5.00
Gyro: Standard 4.00
Cockpit: Standard 3.00
Armor Factor: 293 15.50
Type: Ferro-Fibrous
Internal Armor
Structure Value
Head: 3 9
Center Torso: 30 45
Center Torso (rear): 15
R/L Torso: 20 30
R/L Torso (rear): 10
R/L Arm: 16 32
R/L Leg: 20 40
================================================================================================
Weapons and Ammo Location Critical Tonnage
------------------------------------------------------------------------------------------------
CASE II RT 1 0.50
SRM 4 (Ammo 25) RT 1 1.00
Streak SRM 6 (Ammo 30) RT 2 2.00
MASC LT 4 4.00
Targeting Computer LT 4 4.00
ER PPC RA 2 6.00
Improved Heavy Large Laser RA 3 4.00
SRM 4 RA 1 1.00
Streak SRM 6 RA 2 3.00
ER PPC LA 2 6.00
Improved Heavy Large Laser LA 3 4.00
SRM 4 LA 1 1.00
Streak SRM 6 LA 2 3.00
================================================================================================
Alpha Strike Statistics
------------------------------------------------------------------------------------------------
Point Value (PV): 60
TP: BM, SZ: 4, TMM: 2, MV: 10"
Damage: (S) 5 / (M) 5 / (L) 4, OV: 4
Armor (A): 10, Structure (S): 5
Specials: CASEII, OMNI
|
|
|
| Back to top |
|
|
|
| |
» |
All times are GMT-04:00 |
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
|
|
|
|
|
